Operating
Understanding and enjoying the Kultube
For settings with larger averages the change in the release time is easy to
recognize. With very small values the control voltage for the Gain Cell “sticks”
to the rectified signal and works almost like an envelope follower.
Fig. 8 on the next page shows the various effects of different release time
settings on a sinus burst, although the principle is not as easily seen here.
These changes are most clearly heard in a drum loop with lots of dynamics.
Turned fully CCW (fast averaging) the drums pump and you get lots of volume,
whereas turned fully CW the control is unobtrusive, but you gain less loud-
ness. For summed signals a mid-range setting (0.8 s to 1.5 s) is therefore
recommended. As in the case of attack control with PTC, release control makes
sense not just for sum processing, but can also be used to outstanding advan-
tage with other signal types such as bass, percussion, effects or that at least
as problematic as widespread signal type “untrained speaker”, while at the
same time greatly simplifying your processing.
Fig. 7b
Fig. 7c
A
BC
AB C
18