Filter
Top Products
14. Wall Mounting Bracket - Assembly Instructions
A dedicated wall mounting bracket (Part No. 8000 0671) is available for the i15.
The design of the bracket allows the loudspeaker to mounted either in portrait or
landscape orientation:-
Landscape mounting - Remove two of the original M8 countersunk screws on one
side of the cabinet, place the T- Bar in position and fix in place using the two cap-
head bolts which are included along with the bracket hardware, remembering to use
the washers and locking washers which are also provided. Assemble the bracket as
shown on the diagram below. It is imperative that the bracket is fixed soundly to the
wall. Be sure to use the correct fixings (e.g. Rawbolt, Rawplug) according to the wall
type.
Portrait mounting - Using a hacksaw, cut along the indents on the T-bar. Carry out
the above instructions, removing two of the original M8 countersunk screws on top of
the cabinet.
Exploded View of Bracket
Assembled View of Bracket