Filter
Top Products
Technical Specifications
Frequency Response (1) +/- 3dB 49Hz - 19kHz
-10dB Point 43Hz
Nominal Dispersion 60
o
x 40
o
(H x V)
Driver Compliment MF/HF – 1 x 250mm (10”) PowerDual™
LF - 1 x 380mm (15”)
Configurations Bi-amp (standard) - LF & Passive MF/HF
Tri-amp (optional)
Components LF Midrange High Frequency
Frequency Band (3) 43Hz – 180Hz 180Hz – 2.77kHz 2.77kHz – 19kHz
Sensitivity (1) 101dB 107dB 110dB
Power Handling (2) 400W (average) 175W (average) 50W (average)
800W (programme) 350W (programme) 100W (programme)
1600W (Peak) 700W (peak) 200W (peak)
Impedance 8Ω 16Ω 16Ω
Maximum SPL (3) 127dB (average) 129dB (average) 127dB (average)
133 (peak) 135dB (peak) 133dB (peak)
DI Averaged (PCQ) 11.0, 500 Hz - 16 kHz
@ 1kHz (ISO) 12.6
@ 2kHz (ISO) 12.2
@ 4kHz (ISO) 9.5
@ 8kHz (ISO) 11.5
@ 16kHz (ISO) 12.3
Q Averaged (PCQ) 13.5, 500 Hz - 16 kHz
@ 1kHz (ISO) 18.3
@ 2kHz (ISO) 16.7
@ 4kHz (ISO) 8.8
@ 8kHz (ISO) 14
@ 16kHz (ISO) 16.9
Crossover Active 180Hz, Passive 2.6kHz (standard model)
4th order high pass, 4th order low pass
Enclosure 18mm multi-ply birch plywood
Finish Textured black paint (optional in white)
Protective Grille Foam covered, powder coated perforated steel
Connectors 2 x Speakon NL4MP in/out (standard model)
4 x Speakon NL4MP (optional tri-amp model)
Fittings 8 x M10 inserts & 2 pullback points
4 x Recessed Carrying handles
Dimensions 1116mm x 680mm x 540mm
(43
15/16” x 26 ¾” x 21 ¼”)
Weight 69kg (152.1 lbs)
NOTES: (1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
The iQ 10/15 is designed for use with the Tannoy TDX1 & TDX2 digital system controller, which provide a preset configuration of
Crossover frequencies, relative output levels, and system equalization for optimum performance. Should you intend using an alternative
Loudspeaker management system, these parameters can be accessed from the Tannoy website –
www.tannoy.com - or can be found in this
IQ 10/15 user manual.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the publis
h
which Tannoy reserves the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
Unique Funktion One Axhead Technology (UK patent number GB2270606) is incorporated into
Tannoy iQ Series SuperDual
TM
products by agreement with Funkton One Research