Filter
Top Products
13
> set the 1st IF of the channel with , or with the
ten-key keypad
> set the correct polarisation level (
A v = vertical, A h =
horizontal) with
> press and
> set the subcarrier frequency of the channel with ,
or with the ten-key keypad
> press (save)
> and, on request, set a channel position in the range of 241 to
255 using the ten-key keypad or
The table is automatically selected.
> save the channel data on this channel position with
(save) or
> leave the setting with or without saving
6.5 Deleting channels
Due to the preprogrammation copy of the automatic tuning
system undesired channels may be saved. These channels can be
deleted individually.
> set the channel table with , or
> set the undesired channel using the ten-key keypad or
> press the recessed (delete-key)
The receiver automatically switches to the next higher channel.