Filter
Top Products
EN
Before You Begin
Useful Advice
• Do not use your system immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction. If moisture forms inside this
system, it may not operate properly. To
correct the problem, turn off the power and
wait about 30 minutes for moisture to
evaporate.
• This system is fitted with a laser. To avoid
accidents, it is to be dismantled by qualified
technicians only.
• Never leave the tray open as dust could cover
the laser lens and/or the tray could be
bumped into accidentally.
• Do not place the system near wet areas such
as bathrooms and pool side. Avoid storing the
system at humid places or near abnormally
heated areas.
• Power is continuously supplied to the system.
To disconnect power completely, unplug the
power cord from the power outlet.
2
• Ensure minimum distance around the
apparatus for sufficient ventilation.The
ventilation should not be impeded by
covering the ventilation openings with items,
such as newspaper, etc.
• No naked flame source, such as lighted
candles, should be placed on the apparatus.
• Attention should be paid to enviornment
aspects of battery disposal.
AC Power
Plug the power supply cord into the AC power jack
on the back of the unit, and into an AC power
supply outlet that accepts the plug supplied with
your unit.
TM9049 EN 1/7/05, 10:19 AM6