Filter
Top Products
5 Configuring the Receiver
74 DSM 132/132RS Receiver User Guide
To install the Base Station option:
1. Use the power/data cable to connect the receiver to the serial
port on the office computer (this is usually COM1 or COM2).
2. On the office computer, click and then select Programs
/ FlashLoader100.
3. Click
Find Device.
FlashLoader100 detects the receiver and automatically selects
the correct port. A message appears identifying the port which
is connected to the receiver. Click
OK.
4. Enter the password. For more information, see Step 2 through
Step 6 on page 82.
To configure the communication port:
1. Navigate to the Config Port B (or Config Port A) menu.
2. Press 2. The Port Input/Output screen appears:
3. Press 3 to activate the cursor.
4. Press 3 until the cursor highlights the third item on the second
line.
5. Press 2 until RTCMI appears:
6. Press 4 to save the settings.
7. Press 5 several times to return to the Home screen.
åæ I TSIP 9600
801 0 RTCMI 9600