Viper d600.1 Car Amplifier User Manual


 
19
© 2002 Directed Electronics, Inc
The Viper d600.1/1200.1 subwoofer
amplifiers can also be used in multiples
of the master/slave combinations
allowing for unlimited expansion to a
systems subwoofer section. To use
multiples of amplifier combinations the
following directions must be adhered to
for best results.
AAuuddiioo ssiiggnnaall
- Divide the head unit
or processor audio signal to the
master amplifiers by using RCA Y
adapters. Be sure to divide them an
even number of times to ensure the
input level at each master amplifier
is matched.
RReemmoottee SSuubb LLeevveell CCoonnttrrooll
- The
Remote Sub Level Control cable can
be divided several times to connect
to each master amplifier. This can
be accomplished by using one or
more Directed Remote Sub Level
cable splitters. Standard single-to-
double phone line splitters and
accessories from a local electronics
store can also be used.
For systems with more than two
master/slave combinations, use
multiple single-to-double splitters.
Do not use phone splitters that
divide the signal more than once
per splitter or splitters designed for
multiple uses.
AAmmpplliiffiieerr ccoonnffiigguurraattiioonn
- Set up
each master/slave amplifier combi-
nation as described for the combi-
nation type being used. (Refer to
the
Parallel Synced Gain
or the
External Synced Bridged
section of
this guide for amplifier and speaker
connection descriptions.)
MULTIPLE AMPLIFIER COMBINATIONS