Filter
Top Products
4
Completing the First-Time Setup
20
8. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
If you have cable TV, select
whether you have a cable box
or if you connect the TV directly
to a cable from the wall.
9. If the TV Signal screen appears,
the TV will need to scan for
channels, which takes several
minutes. Use the Arrow buttons
on the remote to highlight
Begin Scan and press OK.
Otherwise, use the Arrow and
OK buttons on the remote to
select the input your TV source
is connected to.
10. When you are finished, the message “Your VIZIO TV is set up”
will appear.
The First-Time Setup is complete.