Vizio E390-B1 Car Satellite TV System User Manual


 
4
18
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
Your TV should be installed and the power cord should
be connected to an electrical outlet.
Your devices should be connected.
If you have a wireless network, have the wireless
password ready.
If you are connecting to your network with an Ethernet
cable, connect it to the Ethernet port on the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
3. Use the Arrow buttons on
the remote to highlight your
preferred language, and then
press the OK button.
4. Use the Arrow buttons on
the remote to highlight your
country, and then press the OK
button.
5. Use the Arrow and OK buttons
on the remote to answer the
question about your TV signal
connection, then perform the
channel scan or select the
input source for your cable or
satellite box.
6. When you are finished, “Your
VIZIO TV is set up” will be
displayed.
The First-Time Setup is complete.
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin.
Store Demo Home Use