Filter
Top Products
LED Indicators are located here.
15
Press the Menu button and use the Up/Down Arrow buttons on the remote to access the dierent functions and
acoustic settings of the Sound Bar. Each function and setting will be displayed on the remote control’s LCD display.
The LED Indicators will behave dierently with each function.
Function LED Behavior Description
Bluetooth Pairing
(When searching for device)
Flash from Bottom to Top
and back continuously.
Press the Enter button on the remote. The Sound Bar will be discoverable for 15 minutes.
You can now search for the Sound Bar (VIZIO SB4051) using your Bluetooth Device. The
sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Bass Levels
Two center LEDs
indicate Bass level 0.
Press the Next/Previous button to increase/decrease the bass level.
The LED indicators will move to the top with increasing levels and to the bottom with
decreasing levels.
Treble Levels
Two center LEDs
indicate Treble level 0.
Press the Next/Previous button to increase/decrease the treble level.
The LED indicators will move to the top with increasing levels and to the bottom with
decreasing levels.
Center Levels
Two center LEDs
indicate Dialogue
is centered.
Press the Next/Previous button to increase/decrease the presence of dialog in the
virtual center channel.
The LED indicators will move to the top when the dialog presence is increased and to the
bottom when the dialog presence is decreased.
Surround Levels
Two center LEDs
indicate Surround
is centered.
Press the Next/Previous button to increase/decrease the virtual surround sound level.
The LED indicators will move to the top with increasing levels and to the bottom with
decreasing levels.
Note: DTS TruSurround must be On to adjust the surround level.
BT Pair
Bass
Treble
Center
Surround
LED INDICATORS