Filter
Top Products
2
Specifications
Specification WM-345 (NTSC) WM-345C (Pal)
Image Device 1/3˝ Interline CCD 1/3˝ Interline CCD
Number of Pixels (H) 510 x 492 (H) 500 x 582
Scanning System 525 Lines, 60 Field/Sec 625 Lines, 50 Field/Sec
Sync System Internal Synchronization Internal Synchronization
Horizontal Resolution 330 TV Line 330 TV Line
Video Output 1 Vp-p 75 Ω 1 Vp-p 75 Ω
B.L.C. Back Light Back Light
Compensation (auto) Compensation (auto)
White Balance Auto White Balance Auto White Balance
(auto) (auto)
Minimum Illumination 1 Lux (F: 2.0) 1 Lux (F: 2.0)
Electronic Shutter 1/60 ~ 1/100,000 Sec 1/50 ~ 1/100,000 Sec
Built-In Lens F: 2.97 (option) F: 2.97 (option)
Power Consumption 12 V ± 10% DC, 100 mA 12 V ± 10% DC, 100 mA
Operation Temp. -10°C ~ +50°C, -10°C ~ +50°C,
RH 95% Max. RH 95% Max.
Storage Temp. -20°C ~ +60°C, -20°C ~ +60°C,
RH 95% Max. RH 95% Max.
Weight Approx. 134 g Approx. 134 g
Housing Aluminum Aluminum
Accessories Angle Controller Ring – 3 sets Angle Controller Ring – 3 sets
Fixing Ring – 3 pcs. Fixing Ring – 3 pcs.
Fixing Tube – 1 pc. Fixing Tube – 1 pc.
3
Controls
Monitor Controls:
Sensor: Remote sensor for the
remote control.
Volume (-): Adjusts down with each
function in the menu.
Mode: Switches through the
functions in the menu to select
the desired screen adjustments.
Volume (+): Adjusts up with each
function in the menu.
Power: Turns the monitor on and off.
Remote Control:
Screen Power: Press the ‘POWER’ button to illuminate
the LCD screen.
Control: Pressing the ‘CONTROL’ button will allow
source selection by pressing the ‘AV’ button.
Monitor: Pressing the ‘MONITOR’ button allows the
following adjustments to be selected.
Adjusting the screen options:
Screen Adjustments: Press the ‘PIC’ button to select the
desired screen adjustment, then press the ‘VOL (-)’ or ‘VOL (+)’ to
change the setting. Each press of the ‘PIC’ button will cycle to the next
adjustment in the following order: Contrast, Brightness, Color, Tint, Blue
Screen, Power Direct, Color System, Mirror Mode, Mode Selector.
Contrast: Adjusts the differentiation between light and dark.
Brightness: Adjust the overall Brightness of the LCD display.