1997 Volvo 850
Movement of the seat can be STOPPED at any time by pressing any button on the power seat control
panel.
Refer to the following page for information on programming the memory function.
pg. 3:7 Electrically operated driver's seat, Rear/side-view mirrors
Programming the memory
Three seat positions can be programmed. To program a seat position:
1 Adjust the seat to the desired position.
2 Depress the MEM button.
3 Press button 1 to program the current position of the seat.
Buttons 2 and 3 can be programmed in the same way. To move the seat to a programmed position,
depress button 1, 2 or 3 until the seat stops. If the button is released before the seat has the reached the
programmed position, it will stop as a safety precaution.
NOTE: The seat has an overload protector which engages if an object blocks the movement of the seat.
If this happens, remove the object and wait 20 seconds before operating the seat again.
file:///K|/ownersdocs/1997/1997_850/97850_306.htm (3 of 11)12/30/2006 10:14:13 AM