1992 Volvo 240
1 Unscrew and remove tail lamp inside cover. Note that inside cover is hooked at the upper edge. Lift
the lower end out/up and unhook upper edge.
2 Turn bulb holder approx 3/8" (1 cm) counterclockwise and remove it.
3 Depress bulb in bulb holder, turn it slightly counterclockwise, and remove it.
4 Install a new bulb. Install bulb holder in tail lamp.
NOTE: One of the bulb holder tabs is wider and fits only in corresponding
recess.
Turn bulb holder clockwise. Check that bulb lights. Replace tail lamp inside cover.
Power
Bulbs CP W Socket
US Bulb
No
1 Rear fog light
(Driver side only)
32 21 Ba 15s 1156
2 Back-up light 32 21 Ba 15s 1156
3 Rear turn signal 32 21 Ba 15s 1156
4 Tail light 4 5 Ba 15s 67
5 Reflector – – – –
6 Brake light/tail
light*
32/3 21/5
BaY
15d
1157
*Right side lamp holders are white. Left side lamp holders are black.
file:///K|/ownersdocs/1992/1992_240/92240_088.htm (3 of 10)12/30/2006 9:31:34 AM