Filter
Top Products
USER INSTRUCTIONS: WH2.1 SYSTEM
Rear Channel Connections
CENTRE FRONTREAR
LEFTLEFT RIGHTRIGHT
REARLEFT
REARRIGHT
AVAMPLIFIER
Wall-mounting the
WH-SR1 and WH-SR2
Loudspeakers
1
3
2
Preparing
Speaker
Cables
Connecting
Speaker
Cables
WH-SR1 and WH-SR2 Loudspeakers
The Wharfedale WH-SR1 and WH-SR2 are bipolar units designed for wall mounting and intended for use solely as rear eects
speakers.
In a Home Theatre System, the directional cues come from the front and centre channels. The rear channels provide ambience
and rear perspective and for this purpose a bipolar design with its mix of direct and reected sounds ideal. To aid this eect we
recommend placing the WH-SR1 and WH-SR2 speakers in a high position behind the listener.
PREPARATION
Each speaker is supplied with four self-adhesive feet. Apply one to each rear corner before mounting.
CONNECTIONS
You will need one length of twin core cable per speaker. Connect the red (+) terminal of the Left rear unit to the red (+) terminal
of the ampliers Left rear channel output. Connect the black (-) terminal of this unit to the corresponding black (-) terminal of the
amplier. Repeat for the Right speaker. The connection panel uses screw terminals - the drawing above illustrates the connection.
MOUNTING
Connect the cable to the speaker. Site the speakers about 600 mm above the listening position and 2.5-3.5 metres apart, central
to the listener and behind the listening position. Ensure that the wall is sound and can support the product. Fix a suitable screw
rmly to the wall.