Yamaha Las Vegas CD32 Car Stereo System User Manual


 
RADIO MODE
Radio mode
Settino the sensitivitv of station
Switchina to radio mode
seek tuning
If you are in CD or CD changer mode
You can choose whether to tune only
(CD changer only with the Las Vegas
to strong reception stations or to also
mnon\
tune to those with a weak reception.
bV.x),
0 keep pressing the SOURCE @
0 Press the hi IENU button 0.
button until the radio mode -
0 Keep pressing the Y or X button
appears in the display together with
@ until “SENS Ht” or “SENS LO”
the memory bank and frequency.
appears in the display
Selectina the freauencv band /
memorv bank
This unit can receive programs broad-
cast over the FM and AM frequency
band. There are three preset memory
bank for the FM range and one for the
AM range. Six stations can be stored
on each memory bank.
Selecting the FM memory bank
To switch between the FM memory bank
FM1 , FM2 and FMT,
0 press the BANDITS button @.
Selecting the AM waveband
To select the AM waveband,
“SENS HI” means that the tuner is set
high to sensitivity. “SENS LO” means it
is set to the low sensitivity setting. If
“SENS LO” is selected, “LOC” lights up
in the display.
0 Set the required sensitivity using
the < and > buttons 0.
When you have finished making your
changes,
0 press the MENU button 0.
Tuning into stations manually
You can also tune into stations manu-
ally.
0 Press the < or > button @
0 keep pressing the BANDITS button Storing station oresets
@ until AM appears in the display.
Storing stations manually
Tuning into a station
0 Select the required memory bank
There are various ways of tuning to a
(FM1 , FM2 or FMT) or the AM
station. waveband.
Automatic seek tuning
D Tune into the station.
0 Press the Y or 7I button @.
0 Press one of the station buttons
The unit tunes to the next receivable
l-6 @for longer than one second
station.
to store the station in that preset
memory.
10
0 BLAUPUNKT