Yamakawa M2180 Car Stereo System User Manual


 
Operation
6. TA function (TRAFFIC ANNOUNCEMENT)
When press short, it is activated as TA mode on or off.
When TA mode is on and traffic announcement is transmitted.
-When the unit is in CD/MP3 mode, it will switch to radio mode temporarily.
-If the volume level was under the threshold point, it will be raised to the threshold
point.
-When TA station is received, A segment is turned on in LCD display.
7. PTY function (PROGRAM TYPE)
PTY MUSIC---PTY SPEECH---PTY OFF
While selecting PTY type, its selection is implemented by preset buttons as
described in preset key. When PTY is selected, the radio starts to search
corresponding PTY information, and stops if the corresponding PTY information is
detected.
8. DISPLAY (DISP)
Selects radio frequency, clock display and PTY NONE.
To set the clock:
(1). with clock display selected, hold down the "DISP" button until clock display
starts flashing.
(2). Rotate the volume knob to change minutes and hours.
(3). Press "DISP" button to start the clock.
When this key is pressed it is operated as the conversion of each display mode as
follow.
1) Incase of receiving RDS station
TUNER MODE
PS---PTY---FREQ---CT
CD/MP3 PLAYER MODE
CDP---PS---PTY---FREQ---CT
-15-