4-22 Agilent E5250A User’s Guide, Edition 8
Setting up Measurement Environment
Connecting the E5250A Output
To Connect the E5255A Output
The E5255A output connector is shown in Figure 4-10. The E5250A SMU INPUT
signal or the E5255A BIAS INPUT signal appear at the E5255A output connectors
as shown in Figure 4-10 when input-output switching path is made. The Kelvin
connection is not available for the E5255A.
Figure 4-10 E5255A Output Connector and Output Signal
You can easily connect the E5255A output to the connector plate or your test fixture
by using the cable shown in Table 4-5 and Figure 4-11. The cable can be connected
to the E5255A output ports labeled as 1−8, 1−8 (9−16), or 1−8 (17−24).
Table 4-5 E5255A Output Cable
Figure 4-11 16494D 8-Channel Shielded Coaxial Cable for E5255A
Signal (force)
Signal (force)
GUARD
GND
GND
(b) When BIAS is connected
(a) When SMU is connected
Agilent Model No. Description
16494D-001 8-Ch Shielded Coaxial cable, 1.5m
16494D-002 8-Ch Shielded Coaxial cable, 3m
To
E5255A
To
Connector Plate
FEMALE
MALE
