26-EN
Setting the Auxiliary Data Field Display
(XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the XM mode,
and then press
/ENT.
Bluetooth
*
1
General Display XM
*
2
/SIRIUS
*
3
HD Radio
*
4
Bluetooth
*
1
Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
*
2
Only when XM Radio is connected.
*
3
Only when SIRIUS Radio is connected.
*
4
Only when HD Radio is connected.
3
Press /ENT to activate the XM ADF mode.
4
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press
/ENT.
When setting to ON, Auxiliary Data Field is displayed by
pressing VIEW (refer to the “Changing the Display” section
on
page 25.).
5
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing /ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
Controlling USB memory (Optional)
A USB memory device may be connected to this unit. With a USB
memory device connected to this unit, the audio files will be playable
from this unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory device containing MP3/WMA/AAC,
these files are playable on this unit.
1
Press SOURCE/ to switch to the USB mode.
TUNER XM/SIRIUS*
1
DISC USB iPod*
2
/AUX+*
3
Bluetooth Audio*
4
CHANGER*
5
TUNER
*
1
Only when XM Radio or SIRIUS Radio is connected.
*
2
Displayed only when the iPod is connected and AUX+ Setup is set to
OFF, refer to “Setting the AUX+ Setup Mode” (
page 20).
*
3
Displayed only when the AUX+ Setup is set to ON, refer to “Setting
the AUX+ Setup Mode” (
page 20).
*
4
Displayed only when Bluetooth IN is set to ADAPTER, refer to
“Bluetooth Setting” (
page 19).
*
5
Only when the CD changer is connected.
2
To pause playback, press / .
Pressing / again will resume the playback.
• The root folder is displayed as “ROOT” in the Folder Name Search
mode.
• This unit plays back files in the USB memory with the same controls
and modes as playback of CDs containing MP3/WMA/AAC. For
details, refer to “CD/MP3/WMA/AAC” on
pages 10 to 13.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
USB memory (Optional)
SOURCE/
/
