9-EN
2
Press
/ENTER
to display the Program Type screen.
3
Rotate the Double Action encoder to select a
program, and press /ENTER.
The selected program is received.
Program Service example:
Changing the Display (HD Radio mode
only)
Press VIEW.
Every time VIEW is pressed changes the display.
* You can set a long or short HD Radio station name. Refer to “HD
Radio Station Call Setting (Station Call)” (page 23).
When an iPhone/iPod is connected to the iDA-X305 by using the proper
cable, the controls on the iPhone/iPod are not functional.
• Internet or telephone functions, etc., of the iPhone or iPod touch are
not controllable from the unit, but these functions can be controlled
using the iPhone or iPod touch itself.
• If you connect an iPhone to the iDA-X305, it can be used as an iPod.
If you use iPhone as a hands-free phone, you need the optional
Bluetooth INTERFACE (KCE-400BT).
• This unit does not support the iPod FULL SPEED™ connection.
Therefore, even if you connect an iPhone/iPod using the FULL
SPEED™ connection cable (KCE-433iV) on the Bluetooth
INTERFACE (KCE-400BT), you cannot operate the iPhone/iPod.
• This unit does not support video playback from iPhone/iPod.
About iPhone/iPod usable with this unit
• This unit can be used with the following iPhone/iPod versions.
Correct function of earlier versions cannot be guaranteed.
iPhone 3G : Ver.2.0.2
iPhone : Ver.2.0.2
iPod touch : Ver.2.0.2
iPod classic : Ver.1.1.2
iPod with video : Ver.1.3
iPod nano (3rd generation) : Ver.1.1.3
iPod nano (2nd generation) : Ver.1.1.3
iPod nano (1st generation) : Ver.1.3.1
Multicast Radio Station Program No. Program Service
88.9MHz No.1
MPS
: Main Program Service
88.9MHz No.2 SPS: Supplemental
Program Service
88.9MHz No.3 SPS: Supplemental
Program Service
·
·
·
88.9MHz No.8 SPS: Supplemental
Program Service
Song title
Artist title
Album title
Frequency
Station Call
Letter
*
Calendar/
Time
Song title
Artist title
Album title
Frequency
iPhone/iPod
(FUNCTION/SETUP)
SOURCE
/
/ENTER
Double Action encoder
VIEW
