ATD-2114 - 3 - Rev. 3/19/09
Operating Instructions • Warning Information • Parts Break down
Air Supply...
pres sures.
It is recommended that air pres sure of these tools mea sures
90 psig; 6.2 bar) raises per for mance beyond the rated
1/4" NPT. Line pressure should be increased to compensate
for unusually long air hoses (over 25 feet). Minimum hose
diameter should be 3/8" I.D. and fittings should have the
same inside di men sions and be tightly secured.
Operating Instructions…
Lubrication & Maintenance…
oil can be squirted into the tool air inlet or into the hose at
Warranty...
consequential damages.
exclusion may not apply to you.
