A SERVICE OF

logo

Operating Instructions
1. TO ADJUST AIRFLOW UPWARD OR DOWNWARD: Tilt fan head to the desired angle. This
high velocity fan can be used alone or in conjunction with air conditioning. Rotating the fan head
upward serves to pull air from the floor and circulate it throughout the entire room.
2. SPEED CONTROL: Be sure to use this fan with a power outlet that conforms to the voltage
requirements. The fan comes with two different speeds. Adjust the desired speed by rotating the
switch knob: 0 - Stop, 1 - Low , 2 - High
3. Please assemble the wheels as shown in the instruction of wheel assembly drawings below
before operating.
Wheel assembly drawing (see diagrams below)
1. Insert the two wheels into the two holes on the bracket to match the Hole A & Hole B (drawing 1)
2. Insert the screw to the hole on the wheel shaft then tighten it (drawing 2)