5. Ensure tha he replacement ery is oriented with the ve on the right side and the on the le side,
just as the old
ery came out.
6. Connec he red #4 jumper cable and red recharging wire to the
ve (+) terminal (also marked with red),
then connec he black #4 jumper cable and recharging wire to the nega
(-) terminal. Double check all
conne
and ghten.
7. Taking care no o damage the circuit board, slide the new
ery in
8. Replace the ery compartment cover and secure in place with the Phillips head screws.
SPECIFICATIONS
ITEM # .... ...….......... ...... . . ATD-5933
VOLTAGE .... . ..... . ... . . . ..... . . 12/24V DC SWITCHABLE
BOOST POWER ..... . ... . . . ..... . . 700 CRANKING AMPS FOR 24V, 1400 CRANKING AMPS FOR 12V.
PEAK AMPS… …...…….. . . .. . . . . . . . . . .12V – 3400 AMPS, 24V - 1700 AMPS
BATTERY TYPE ..... .... ... ...... . SEALED, LEAD- ACID, RECHARGEABLE, MAINTENANCE-FREE, 12V DC, 22-AM
P-HOURS
BOOSTER CABLES ... . ... . . . .......84”, #2 GAUGE WELDING CABLES WITH 1000 AMP "ALLIGATOR" CLAMPS
DIMENSIONS …... . . . . . . . . . . ... . . . 15.75” x 14.56” x 7.48” (40 x 37 x 19 CM)
