- 15 -
Hotkey Summary Table
Combination Function
[Scroll
Lock]
[Scroll
Lock] +
[Enter] Toggles the KVM and Audio focus between the two
ports.
Note: If the KVM and Audio focus are on different
ports, only the KVM focus switches.
[k] [Enter] Toggles the KVM focus only.
[s] [Enter] Toggles the Audio focus only.
[a] [Enter] Starts Auto Scan. The KVM focus cycles from port
to port at 5 second intervals.
[a] [Enter] [n] Starts Auto Scan. The KVM focus cycles from port
to port at n second intervals.
Note: Replace n with a number between 1 and 4 (1
= 3 secs; 2 = 5 secs (default); 3 = 10 secs; 4 = 20
secs).
To exit Auto Scan, press [Esc] or [Spacebar]. Auto
Scanning stops when you exit Auto Scan mode.
[x] [Enter] Toggles the hotkey invocation key between [Scroll
Lock] and [Ctrl].
[m] [Enter] Enables/disables mouse emulation function.
[n] [Enter] Enables/disables keyboard emulation.
[w] [Enter] Enables/disables mouse port-switching function.
[F2] [Enter] Activates Mac keyboard mapping.
[F10] [Enter] Automatically detects and sets the keyboard
operating platform.
[F4] [Enter] Lists current switch settings.
[F5] [Enter] Performs a USB keyboard and mouse reset.
[F6] [nn] [Enter] Sets the keyboard language layout.
Note: nn is a two digit number that represents one
of the following keyboard language codes: US
English 33; French 08; Japanese 15
[d] [Enter] Invokes the Video DynaSync function, which
eliminates boot-up display problems and optimizes
resolution when switching between ports.
[e] [Enter] Enables/Disables the Power on Detection feature.
[r] [Enter] Resets hotkeys to the default setting.
cs692.fm Page 15 Wednesday, October 29, 2014 5:20 PM
