- 15 -
CS-84A Hotkey Operation
Hotkey operations for the CS-84A begin by pressing and
releasing the [Alt+Ctrl+Shift] combination.
Note: The combination must all be on the same side (i.e.,
[LeftAlt+LeftCtrl+LeftShift] or
[RightAlt+RightCtrl+RightShift]).
The CS-84A provides the following Hotkey Port Selection
features:
Selecting the active port
Auto Scan Mode
Last/Next Mode
Selecting the Active Port
Each KVM port is assigned a numeric ID (1–4). You can directly
access any computer on the installation with a Hotkey
combination that specifies the ID of the KVM port that the
computer is connected to. The steps involved are:
1. Press and release [Alt+Ctrl+Shift].
2. Key in the appropriate Port ID number (1, 2, 3, or 4).
3. Press [Enter] to complete your selection.
Auto Scan Mode
The CS-84A’s Auto Scan feature automatically cycles the KVM
focus through the four computers at regular five second intervals
so that you can monitor their activity without switching from port
to port manually. To invoke Auto Scan Mode, do the following:
1. Press and release [Alt+Ctrl+Shift].
2. Press 0 (zero).
3. Press [Enter].
