KH1508Ai / KH1516Ai User Manual
12
Stacking and Rack Mounting
The KH1508Ai / KH1516Ai can be stacked on the desktop or rack mounted at
the front or rear of the rack. The following sections take you through the
procedures for each method.
Stacking
The KH1508Ai / KH1516Ai can be placed on any appropriate level surface that
can safely support its weight plus the weight of its attached cables. To place the
KH1508
Ai / KH1516Ai, or to stack units if you are daisy chaining them,
remove the backing material from the bottom of the rubber feet that came with
this package, and stick them onto the switch’s bottom panel at the corners, as
shown in the diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7cm at the back for power cord and cable clearance.
