Appendix E: Sample Customer Configurations
Example 2. Secure LAN, No Defaults
DEFINITY LAN
System
Client/
Server
C2C1
Host name =
lgateserver
IP address = 135.20.1.1
Subnet mask = 255.255.255.0
Client name = lgateclient
IP address = 135.20.1.2
IP address = 192.170.10.1 IP address = 192.170.10.2
Subnet mask = 255.255.255.0
Assembly
IP address = 192.170.10.100
Subnet mask = 255.255.255.0
Gateway
This sample configuration requires that both the DEFINITY LAN Gateway system
assembly and the client/server be administered, as follows:
Administer the DEFINITY LAN Gateway system assembly:
1. From the Main Menu, choose TCP/IP Administration. Then choose
This Host.
A. Change the host name to a name you have made up
(
lgateserver
in this example).
B. Do the same for the host IP address (
135.20.1.1
in this
example), and if subnetting is used, the subnet mask
(
255.255.255.0
in this example).
2. From the TCP/IP Administration Main Menu, choose Local Host
Table.
A. Delete the default client entry.
B. Press
Add
to access the Add Hosts screen. Add the entry
for the client (
lgateclient
in this example) on the same
network (the same subnet if subnetting is used).
C. You will be on the Local Host Table screen when done.
Press
CANCEL
to return to the TCP/IP Administration screen
and then select
EXIT
on this menu to return to the Main
Menu.
3. Administer the brouter. From the Main Menu, access the Brouter
Administration screen.
A. Delete the default entry.
B. Press
ADD
to access the Add Client Link screen. Add the
entry for the client (
lgateclient
in this example) on the
appropriate port and client link.
Issue 1 January 1996 E-3
