Beko D2 8101 ES D2 8101 E Manual

A SERVICE OF

next previous

22 - EN

The same symbol will also be displayed

whenever any button is pressed while

the machine is child-locked.

To deactivate the child-proof lock,

press the 2nd and 4th auxiliary function

buttons for 3 sec.

“C:OFF”(Child-prooflockisdeactivated)

label appears on the screen.

Ending the program through

canceling

“Start/Pause/Cancel”button(Figure

2-10)ispressedfor3secondstocancel

theprogram.Startsymbol(Figure

3-13j)willflashduringcancellation.

After cancellation, the symbol of the

corresponding step at which the

cancellation was made will remain lit and

“End”willappearonthescreen.

Program in rinse hold mode

• This process is shown with the

flashingSpinSymbol(Figure3-13c)

and the lit up Standby Symbol

(Figure3-13k).

If you wish to spin when the machine is

inthismode:

Adjustthespinspeed.Press“Start/

Pause/Cancel”button(Figure2-10).

The program continues, pumps out the

water and spins. The Standby Symbol

(Figure3-13k)fadesoutandStart

Symbol(Figure3-13j)lightsup.

If you want to discharge the water only

withoutspinning:

Press“Start/Pause/Cancel”button

(Figure2-10).TheStandbysymbol

(Figure3-13k)willfade.TheStart

symbol(Figure3-13j)willlightup.The

program continues and only drains the

water.

End of program

When the program is finished, the

symbols of the relevant steps will remain

lit up and the auxiliary function, spin and

temperature data selected at the start-

up of the program will remain selected.

“End”willappearonthedisplay.