A SERVICE OF

logo

11
13.
Click on the DETAILS tab. In the pull-down menu “Print to the following port:”,
select the correct port this printer is connected to on the Bitronics switch:
LPx1 – PA (auto switch)
!
Select this if the printer is connected to Port A of the
Bitronics switch
LPx1 – PB (auto switch)
!
Select this if the printer is connected to Port B of the
Bitronics switch
In the image below, the printer is connected to Port B of the Bitronics switch.
Therefore,
LPx1 – PB (auto switch)
is selected. When done, click OK.