After you have removed the sight shields (if equipped) on the 4.6L V8 engine, here is what you will see:
A. Remote Negative (-) Terminal. See Jump Starting
on page 6‑40
.
B. Remote Positive (+) Terminal. See Jump Starting
on page 6‑40
.
C. Battery. See Battery on page 6‑40.
D. Passenger Compartment Air Filter. See Passenger
Compartment Air Filter on page 4‑50.
E. Power Steering Fluid Reservoir. See Power
Steering Fluid on page 6‑35.
F. Engine Oil Fill Cap. See “When to Add Engine Oil”
under Engine Oil on page 6‑18.
G. Engine Oil Dipstick (Out of View). See “Checking
Engine Oil” under Engine Oil on page 6‑18.
H. Brake Master Cylinder Reservoir. See “Brake
Fluid” under Brakes on page 6‑37.
I. Engine Coolant Surge Tank and Pressure Cap.
See Cooling System on page 6‑26.
J. Engine Air Cleaner/Filter. See Engine Air Cleaner/
Filter on page 6‑23.
K. Underhood Fuse Block. See Underhood Fuse
Block on page 6‑118.
L. Windshield Washer Fluid Reservoir. See “Adding
Washer Fluid” under Windshield Washer Fluid
on
page 6‑36
.
If your vehicle is equipped with front compartment
underhood sight shields, before closing the hood be
sure to reinstall the sight shields. To reinstall the
shields, locate the tabs on the left and right sides and
insert them into the openings in the tower to tower
brace. Then insert the fasteners into the top of the
shield and push the fasteners back into place.
6-17
