Cadillac ATS Owner Manual - 2013 - CRC - 10/5/12
3-6 Seats and Restraints
Memory Seats
If equipped, the "1," "2," SET, and
B (Exit) buttons on the driver door
are used to manually save and
recall memory settings for the driver
seat and outside mirrors.
Storing Memory Positions
To save positions to the “1” and “2”
buttons:
1. Adjust the driver seat and
outside mirrors to the desired
driving positions.
2. Press and hold SET and “1” at
the same time until a beep
sounds.
3. Repeat Steps 1 and 2 for a
second driver using “2.”
To save positions to the
B (Exit)
button and Easy Exit features:
1. Adjust the driver seat and
outside mirrors to the desired
positions for getting out of the
vehicle.
2. Press and hold SET and
B at
the same time until a beep
sounds.
Manually Recalling Memory
Positions
Press and hold "1," "2," or
B to
manually recall the previously
stored memory positions.
Releasing "1,” "2," or
B before the
stored positions are reached stops
the recall.
There is also the ability to press and
release “1,” “2,” or
B to manually
recall the previously stored memory
positions. The ignition must be
in ON/RUN/START, and the
transmission must be in P (Park)
(parking brake is set for a manual
transmission). Placing the ignition in
OFF before the stored positions are
reached stops the recall.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
