
43
Snapshot Tutorial
• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has
an aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio
of television screens of the past. Your camera can record images that are
compatible with the aspect ratio an HDTV screen.
• You should regard the print paper sizes suggested here as guidelines only
(200 dpi print resolution).
• Available image sizes are limited for some functions as noted below.
1. In the REC mode, press [2] ( )
once.
2. Use [4] and [6] to select the flash
setting you want and then press
[SET].
16M
This image size cannot be selected when using “High Speed Night
Shot”. Selecting “16M” in another mode and then switching to “High
Speed Night Shot” will cause the image size to change to “10M”
automatically.
3:2,
16:9
These image sizes cannot be selected when using “High Speed CS” or
“High Speed Night Shot”. Selecting “3:2” or “16:9” in another mode and
then switching to “High Speed CS” will cause the image size to change
to “16M” automatically. In the case of “High Speed Night Shot”, the
image size will change to “10M” automatically.
Using Flash (Flash)
Auto Flash
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Flash
[2] ( )