Contents
xxxi
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Configuring IP Addressing 38-5
Default Addressing Configuration 38-6
Assigning IP Addresses to Network Interfaces 38-7
Use of Subnet Zero 38-7
Classless Routing 38-8
Configuring Address Resolution Methods 38-9
Define a Static ARP Cache 38-10
Set ARP Encapsulation 38-11
Enable Proxy ARP 38-12
Routing Assistance When IP Routing is Disabled 38-12
Proxy ARP 38-12
Default Gateway 38-12
ICMP Router Discovery Protocol (IRDP) 38-13
Configuring Broadcast Packet Handling 38-14
Enabling Directed Broadcast-to-Physical Broadcast Translation 38-15
Forwarding UDP Broadcast Packets and Protocols 38-16
Establishing an IP Broadcast Address 38-17
Flooding IP Broadcasts 38-17
Monitoring and Maintaining IP Addressing 38-18
Enabling IP Unicast Routing 38-19
Configuring RIP 38-20
Default RIP Configuration 38-21
Configuring Basic RIP Parameters 38-21
Configuring RIP Authentication 38-23
Configuring Summary Addresses and Split Horizon 38-23
Configuring Split Horizon 38-24
Configuring OSPF 38-25
Default OSPF Configuration 38-26
OSPF Nonstop Forwarding 38-27
Configuring Basic OSPF Parameters 38-29
Configuring OSPF Interfaces 38-29
Configuring OSPF Area Parameters 38-31
Configuring Other OSPF Parameters 38-32
Changing LSA Group Pacing 38-34
Configuring a Loopback Interface 38-34
Monitoring OSPF 38-35
Configuring EIGRP 38-35
Default EIGRP Configuration 38-37
EIGRP Nonstop Forwarding 38-38
