www.cisco.com
You may want to check how
you appear on the screen. To
do this, tap Selfview ...
... then tap More.
Use + and – to adjust the zoom and the arrow
keys to adjust the camera’s angle. You may also
dene or edit camera presets in this menu, see
“Adding a near end camera preset” on page
6 for details.
Tap Back to go one level back, or tap
anywhere outside to exit the menu.
Entering Camera Control will
also cause the system to show
selfview, so if you know that camera
adjustments are needed, you do not
have to activate selfview rst.
Selfview and camera control
Tap Camera control to gain
access to the Camera control
menu.
5
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
