Installation
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
To connect to a video codec
1. Connect the 10-pin end of the mini-DIN cable to the 10-pin connector on the
AccuMic II (see Figure 3).
2. Connect the Speaker Ref In plug (white) to the video codec’s Audio Out jack.
3. Connect the Mic Out plug (red) to the video codec’s Audio In jack.
4. Using an RCA audio cable (not included), connect the Speaker Ref Out plug
to the television’s Audio In jack.
5. Connect the DC Power connector to the power supply.
6. Connect one end of the power cord to the power supply and the other end to
the AC outlet.
5
Installation
4
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
To connect a second AccuMic II
You can connect an optional AccuMic II extension mic (kit part no. 910-156-117)
to expand the sound pick-up capabilities of the conferencing system. The kit includes
an AccuMic II and a 10' (3 meter) 8-pin to 8-pin mini-DIN cable.
1. Disconnect the first AccuMic II from its electrical power source.
2. Connect one end of the 10' (3 meter) mini-DIN cable that comes with the
AccuMic II extension kit to the 8-pin connector on the first AccuMic II (see
Figure 4).
3. Connect the other end of the cable to the 8-pin connector on the extension
AccuMic II.
4. Reconnect the first AccuMic II to its electrical power source.
Figure 4. Connecting a second AccuMic II
5. Place the mic pads a suitable distance apart on the conference table to
accommodate meeting participants.
