A SERVICE OF

logo

Installing the Coin-Cell Battery
1. Connect the coin-cell battery to the system board connector.
2. Insert the coin-cell battery in the slot on the computer chassis.
3. Install:
a. bottom cover
b. battery
4. Follow the procedures in After Working Inside Your computer.
Removing the Antenna Routing Bracket
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. bottom cover
3. Remove the tapes that secure the wireless antenna cables.
4. To remove the antenna routing bracket:
a. Disconnect all the wireless antenna cables from the connectors [1].
b. Unroute the antenna cables from the routing channel.
c. Remove the screws that secure the bracket [2].
d. Lift and remove the antenna routing bracket from the computer chassis [3].
21