A SERVICE OF

logo

d. hard drive
e. memory module
f. keyboard
g. palmrest assembly
h. system board
i. display assembly
3. Perform the following steps as shown in the illustration:
a. Disconnect the camera cable from the camera.
b. Release the retention tab from the display assembly [1].
c. Remove the camera from the display assembly [2].
Installing the Camera
1. Insert the camera into the display assembly.
2. Connect the camera cable.
3. Install:
a. display assembly
b. palmrest assembly
c. keyboard
d. memory module
e. hard drive
f. WLAN card
g. access panel
h. optical disk-drive
i. battery
4. Follow the procedures in After Working Inside Your computer.
31