34
Computer Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8 buttons to move the red frame
pointer to the Screen Menu icon.
1
Move the red frame to the
function and press the SELECT
button.
Press the Point
dd
button and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
2
✔Note:
• This Screen Menu cannot be operated when 720p(HDTV),
1035i (HDTV), or 1080i (HDTV) is selected in the PC
System Menu (p28).
• The True and Digital zoom +/– cannot be selected when
480i, 575i, 480p, or 575p is selected in the PC System
Menu (p28).
• This projector cannot display any resolution higher than
1280 X 1024. If your computer’s screen resolution is higher
than 1280 X 1024, reset the resolution to the lower before
connecting to the projector.
• The image data in other than XGA (1024 x 768) is modified
to fit the screen size in initial mode.
• The panning function may not operate properly if the
computer system prepared in the PC Adjust Menu is used.
• When Auto setup function is "On" and used any of the Auto
setup function, Digital zoom +/- function will be canceled
then the screen will go back to the normal size.
• When selecting VGA, SVGA or SXGA in the Computer System
Selection (p28) with adjusting Keystone function uppermost
