Model
Dimensions
Number A B C
SS8124L 1257 610 610
SS8130L 1410 762 610
SS8136L 1562 914 610
• SSC8100L
Model
Dimensions
Number A B C
SS8124R 1257 610 610
SS8130R 1410 762 610
SS8136R 1562 914 610
• SSC8100R
Model
Dimensions
Number A B
SS8124 686 610
SS8130 838 762
SS8136 991 914
• SSC8100
GENERAL
Model No. SS_________ #14 gauge, type
304 stainless steel scullery sink. Compart-
ments 356mm deep. Square corner weld-
ed construction. Full length 203mm high
backsplash with 45° sloped top. 38mm
wide sloping top channel rims. Integral
drainboard/s, sink compartments pitched
to drain. Exposed surfaces polished to a
satin finish.
Sink, supported on (4) LK251 stainless
steel, 41mm O.D. tubular legs, #16 gauge
wall thickness. Adjustable bullet shaped
feet.
Shaded areas are models carried
in stock with standard faucet
location.
Non-shaded areas with specified
dimensions are standard models
which must be made to order –
standard faucet location unless
otherwise specified.
Last item in each group is custom.
Fill in dimensions. Standard faucet
location unless otherwise specified.
Drainboards over 648mm furnished
with one tubular leg.
Drainboards over 1,219mm fur-
nished with two tubular legs.
SPECIFIED FITTINGS:
SUPPLY:
DRAIN:
FURNISHED WITH:
LK251. (Four) Stainless steel tubular legs,
41mm O.D., #16 gauge. Adjustable bullet
feet.
ALL DIMENSIONS IN MILLIMETERS.
SEE OTHER SIDE FOR DIMENSIONS IN INCHES.
INDICATE NUMBER OF FAUCET HOLES WHEN
PLACING ORDER. (NON-STANDARD FAUCET
AND OVERFLOW DRILLING LOCATIONS ARE
AVAILABLE. SPECIFY ON DRAWING AT RIGHT.)
NO DRAINBOARD
•
RIGHT DRAINBOARD
LEFT DRAINBOARD
RIGHT & LEFT DRAINBOARD
(CHECK MODEL SPECIFIED):
