A SERVICE OF

logo

O/B
G
W/E
W2
L
Y2
Y1
RC
RH
C
C
6
Take care when securing and routing wires so they do not short to
adjacent terminals or rear of thermostat. Personal injury and/or
property damage may occur.
CAUTION
STEP 2. Mount the New Thermostat
1. Unpack the thermostat and separate the mounting plate from the
thermostat. Remove the packing material from the thermostat.
Gently pull the thermostat straight off of the base. Hold the back
of the thermostat by the lower corners with one hand, and pull
the wall plate off with the other hand.
2.
Feed thermostat wires through rectangular hole between the
terminal blocks in the thermostat wall plate.
Mount the new thermostat
NOTE: Forcing or prying on the thermostat will cause damage to the unit.
Wall plate
Feed wires through
this hole from back
Mounting
holes