IN1403 User’s Manual
21
IN1403 serial commands*
Command Description Command Description
ACI3 set baud rate to 1200 CMDCD2 set delimiters to parentheses ( )
ACI4 set baud rate to 2400 CMDCD3 set delimiters to less and greater < >
ACI5 set baud rate to 4800 CMDCD4 set delimiters to slashes \ /
ACI6 set baud rate to 9600** CMDCD5 set delimiters to signs !#
ACI7 set baud rate to 19,200 CMDCD? return current delimiters
ACI8 set baud rate to 38,400 CON+ increase contrast
ACI9 set baud rate to 57,600 CON- decrease contrast
ACI? return current baud rate CON@ set contrast to normal** (128)
ASP0 set aspect ratio to standard** CONxxx set contrast to absolute value (000-255)
ASP1 set aspect ratio to anamorphic CON? return current contrast
ASP2 set aspect ratio to wide screen CTF0 select comb filter**
ASP3 set aspect ratio to wider screen CTF1 select trap filter
ASP4 set aspect ratio to Tomarama CTF? return current comb / trap filter state
ASP? return current aspect ratio FMTx toggle signal format of channel x (1,2,3)
BALR increase balance right
BALL increase balance left
FMTxy set signal format of channel x (1,2,3) to
composite / S-video y (0/1)
BAL@ set audio balance to center** (016)
BALxxx set balance to absolute value
(000-031)
FMTx? return current signal format from
channel x
BAL? return current balance FP toggle front panel controls
BAS+ increase bass FP0 disable front panel controls
BAS- decrease bass FP1 enable front panel controls**
BAS@ set bass to normal (016) FP? return current front panel state
BASxxx set bass to absolute value
(006 – 027)
FRZ toggle freeze frame
BAS? return current bass FRZ0 disable freeze frame**
BLANK toggle blanking FRZ1 enable freeze frame
BLANK0 disable blanking** FRZ? return current freeze state
BLANK1 enable blanking GAM+ increase gamma
BLANK? return current blank state GAM- decrease gamma
BRG+ increase brightness GAM@ set gamma to normal**(010)
BRG- decrease brightness GAMxxx set gamma to absolute value (001-030)
BRG@ set brightness to normal** (128) GAM? return current gamma
BRGxxx set brightness to absolute value
(000-255)
HTK0 set horizontal tracking to very fast
