IN3254 • Specifications, Part #s, Accessories
Specifications, Part Numbers, and Accessories
A-2
Specifications
Video
Gain ................................................ 0 dB or +2 dB (x1.0 or x1.3),
switch selectable
Bandwidth ..................................... 400 MHz (-3 dB), fully loaded
Video input
Number/signal type ..................... 1 RGBHV, RGBS, RGsB, RsGsBs,
component video (bi-level sync or tri-level
sync for HDTV), or S-video; or
up to 3 composite video
Connectors ..................................... 5 female BNC
Nominal level ................................ 0.7 Vp-p for RGB
Minimum/maximum levels ........ Analog
With switch set to x1 ..................... 0.3 V to 1.0 Vp-p with no offset
With switch set to x1.3 .................. 0.3 V to 0.75 Vp-p
Impedance ..................................... 75 ohms
Horizontal frequency .................... 15 kHz to 115 kHz
Vertical frequency .......................... 30 Hz to 120 Hz
Return loss ..................................... <-40 dB @ 5 MHz
Video output
Number/signal type ..................... 4 RGBHV, RGBS, RGsB, RsGsBs,
component video, S-video; or up to
12 composite video
Connectors ..................................... 4 x 5 female BNC
Nominal level ................................ 1 Vp-p for Y of component video and
S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component
video, and for C of S-video
Minimum/maximum levels ........ Analog: 0.3 V to 1.0 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... <-40 dB @ 5 MHz
DC offset ......................................... 100 mV with input at 0 offset
Sync
Input/output type ........................ RGBHV, RGBS, RGsB, RsGsBs
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ...................................... 1.8 V to 5.0 Vp-p
Output level (analog/TTL) .......... 5.0 Vp-p, unterminated
