Operation, cont’d
MVX Plus 128 VGA Matrix Switchers • Operation
3-22
PRELIMINARY
2. Press and hold the RGBHV button for approximately 2 seconds (fi gure 3-35).
RGBHV RGBHV
Press and hold the RGBHV button until it blinks.
2 seconds
= Blinking button
Figure 3-35 — Select RGB Delay mode
3. Press and release the output 17 button (fi gure 3-36).
3
1
2
3
INPUTS
1
2
3
4
5
6
9
10
7
8
1
Press and release the
Output 1 button.
The button lights green.
The Input 1 through Input 10 buttons display the selected output's RGB
delay. Each lit input button indicates half a second of delay.
In this example, the green input buttons display 3.5 seconds of RGB delay.
3.53.02.52.01.51.00.5
= Unlit button = Lit button
Figure 3-36 — Select an output
4. Press and release the Esc (
>
) button once (fi gure 3-37) to increase the RGB
delay by a half second.
Press and release the Esc (
>
) button twice more to increase the RGB delay by a
whole second. Note the input button indication changes that occur each time
the Esc (
>
) button is pressed and released.
Figure 3-37 show the result of pressing the Esc (
>
) button a total of three
times.
ESC ESC ESC
INPUTS
1
2
3
4
5
6
9
10
7
8
1
3.5 4.0 4.5 5.03.02.52.01.51.00.5
Press the Esc button to increase the RGB interval that is applied to switches to
the selected output by a half second per button push.
= Unlit button = Lit button
The Input 1 through Input 10 buttons display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the green input buttons display 5.0 seconds of RGB interval.
Figure 3-37 — Adjust the RGB delay interval
