XTP T UWP 202 Wallplate Transmitter • SIS Configuration and Control 21
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
Black signal for audio only
NOTE: The switcher uses a black signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal so audio can be
passed without video.
Enable black signal
EB1AFMT} AfmtBX(]
Enable a black signal for audio only.
Disable black signal
EB0AFMT} AfmtBX(]
Disable the black signal.
View black signal setting
EBAFMT} AfmtBX(]
View the black signal setting.
Picture Adjustment Commands (Analog Only)
Pixel phase
Set a pixel phase value
EX1#PHAS} Phas X1#] Adjust the pixel phase to X1#.
Increment value
E+PHAS} PhasX1#]
Increase the pixel phase value.
Decrement value
E-PHAS} PhasX1#]
Decrease the pixel phase value.
View pixel phase value
EPHAS} PhasX1#]
Show the pixel phase value.
Horizontal shift
Set horizontal shift value
EX1$HCTR} HctrX1$]
Set the horizontal location of the first
active pixel in the active window.
Increment value
E+HCTR} HctrX1$]
Increase the shift value (move the
image to the right).
Decrement value
E-HCTR} HctrX1$]
Decrease the shift value (move the
image to the left).
View horizontal shift value
EHCTR} HctrX1$]
Show the horizontal location of
the first active pixel in the active
window.
Vertical shift
Set vertical shift value
EX1$VCTR} VctrX1$]
Set the vertical location of the first
active pixel in the active window.
Increment value
E+VCTR} VctrX1$]
Increase the shift value (move the
image down).
Decrement value
E-VCTR} VctrX1$]
Decrease the shift value (move the
image up).
View vertical shift value
EVCTR} VctrX1$]
Show vertical location of the first
active pixel in the active window.
Image reset
Execute an image reset
1A
Aadj1
]
Set picture adjustment settings to
the default values.
Preset Commands
Input presets
Save an input preset
X1%, SprX1%]
Save the current configuration to
preset X1%.
Recall an input preset
X1%. RprX1%] Recall the preset X1% configuration.
NOTE: X( = Enable or disable 0 = disable
1 = enable (default)
X1# = Pixel phase 0-255 (128 = default)
X1$ = Horizontal or vertical shift 0-65535 (32768 = default)
X1% = Preset number 1-8
