SG Series
TM
UPS PLUS
®
1kVA to 3kVA
22
50/60 Hz ± 5% (Auto–Tracking)
50/60 Hz (Auto Tracking )
± 7% for 100% load variation
< 3% Linear Load, < 5% Non -Linear Load
12V, 7AH Sealed Lead Acid Maintenance-Free
Back Up Time @ Full Load
@ 1/2 Load
Battery times are approximate.
Transfer Time
6’ Cord with
Schuko or
6-15P
6’ Cord with
Schuko or
6-15P
6’ Cord with
Schuko or
L6-20P
Contact the factory fo r other input/output options. .
Environmental
0º C - 40º C (32º F to 104º F)
10% to 95% Non – Condensing
Low Velocity Forced Air Fans
Line, Inverter, Battery Reserve, Load, Bypass, Alarm, Crest, Battery & Load Capacity Level
DC Mode, Low Battery, Over/Under Voltage, Over/Under Frequency, High Temp., Over Load, Fault Alarm
RS-232 Serial Port (Bundled UPSilon 2000 Software)
UPS Module Dimensions
Battery Pack Dimensions
H x W x D Inches (mm)
3.51 x 16.8 x 17.7 (89 x 426.7 x 449.5)
Internal to UPS Module
3.51 x 16.8 x 17.7 (89 x 426.7 x 449.5)
3.51 x 16.8 x 17.7 (89 x 4 26.7 x 449.5) External to UPS Module
2kVA & 3kVA are (2) cabinet configuration, Hot Swappable Batteries
UPS Module Weight lb. (kg)
Battery Pack Weight lb. (kg)
UL 1778, CU L,
FCC Class A
CE available with
Schuko plug only
UL 1778, CUL,
FCC Class A
CE available
with Schuko
plug only
UL 1778, CUL,
FCC Class A
CE available
with Schuko
plug only
Falcon Electric, Inc. - 5106 Azusa Canyon Rd. - Irwindale, CA 91706 - 800.842.6940 Fax 626.962.7720
www.falconups.com - email: sales@falconups.com
©
2003 Falcon
®
Electric, Inc. All rights reserved. Falcon
®
and the Falcon Electric logo are registered trademarks of Falcon Electric, Inc.
All other brand names and trademarks are the property of their respective owners.
The information and specifications stated in this document are subject to change without notice. MD44010-1F 08-05-03
60 Hz to 50 Hz Frequency Conversion
50 Hz to 60 Hz Frequency Conversion
SNMP/HTTP Network Card (Internal)
Standard Contact Closure Interface Card
Extended Run Time Battery Packs (minutes to hours)
Heavy Duty Roller Bearing Slide Rails for side mounting