Adventure without misadventure
How many times have you hesitated to try new fishing grounds or stay out longer
because you couldn’t trust your fuel level gauges? Introducing a remarkable tool that
will give you greater range with less fuel. Plus, it pays for itself: A Fuel Monitoring
System from FloScan.
FloScan Shows Exact Fuel Use
FloScan shows exactly how much fuel you’ve used and how fast you’re using it. Rather
than trying to measure what’s sloshing around in your tanks, FloScan’s electronic
sensors measure fuel flow right at your engine. And the computerized meter indicates
precise consumption totals. There’s no guesswork. Unlike fluctuating fuel tank float
gauges, you receive immediate, accurate data. No matter how rough the seas, no
matter how many tanks or engines in your boat.
For Less Than the Cost of a Tow
FloScan pays for itself in fuel savings alone. You can easily set your boat’s most
efficient speed by watching your FloScan to see how GPH varies at different speeds
and running conditions. Most skippers can save 10% to 30% on their fuel bill, usually
paying for their system in just a few seasons. Something else to consider: FloScan
costs less than a typical tow if you run out of fuel.
Engine Speed
2800 RPM
Boat Speed
21 knots
Fuel Consumption
19 GPH
Engine Speed
2200 RPM
Boat Speed
14 knots
Fuel Consumption
16 GPH
Engine Speed
3400 RPM
Boat Speed
24 knots
Fuel Consumption
31 GPH
321
At 2200 RPM, boat speed is 14 knots.
The FloScan is showing fuel
consumption at 16 GPH.
Current fuel efficiency is 0.88 nMPG.
At 3400 RPM, boat speed is 24 knots
and fuel consumption is 31 GPH.
Current fuel efficiency is 0.77 nMPG.
At 2800 RPM, boat speed is 21 knots
and fuel consumption is 19 GPH.
Current fuel efficiency is 1.10 nMPG.
With FloScan, you’ll be able to pinpoint
the engine speed that will cover the
most ground with the least amount of
fuel consumed.
FL SCAN
INSTRUMENT CO, INC.
The Foundation of FloScan's Technical Success
For over 30 years FloScan's fuel flow sensors have outperformed all
others for marine gasoline and diesel engines from 25 to 4300 HP. No
other fuel flow sensor design can match FloScan’s (+/-) 1/4% repeatability
over a 100/1 flow range. For example, FloScan provides exceptional
accuracy from fuel flows down to 0.5 GPH (idling/troll speeds) to flow
rates up to 50 GPH (full throttle). Sapphire jewel bearings in FloScan
sensors give infinite life and guarantee unwavering accuracy. Low cost
steel bearings in competitive flow sensors wear so that acccuracy falls.
Only FloScan fuel flow sensors have been accepted by the automobile
and heavy duty truck manufacturers for installation in new vehicles.
FloScan has supplied all the flow sensor needs of general aviation aircraft
during the past 25 years with a perfect safety record. FloScan fuel flow
technology sets the standard.
High Performance
Fuel Flow Sensors
SPEED VS. FUEL ECONOMY
SPEED VS. FUEL ECONOMY
High Performance
Fuel Flow Sensors
Run Without Fear of
Empty Fuel Tanks
Run Without Fear of
Empty Fuel Tanks
