Client: PIL (Wal*Mart)
Project: 169164
Language: EN
Date: 06.03.2008
Version: 08
Page: 8 (of 14 pages)
8
Barcode: 690 5039 10 000 7 00243
OPERATION
• Press min (26) and hold for 3 seconds. The LCD display (31) flashes. Press again to
set minutes.
NOTE: The time setting will be deleted if you unplug coffee maker from the outlet and do
not plug back in within 14 seconds.
flashes on LCD display (31).
Starting brewing
• Press (30) once to start the manual brewing cycle. (30) lights up. The brewing
begins.
NOTE: To interrupt brewing, press (30) once more.
• When buzzer sounds twice, the brewing cycle is complete. The keep warm cycle
starts. Remove carafe (14) to serve coffee (ill.
h
). Return it to the keep warm plate
(12) to keep it warm.
CAUTION: Do not touch keep warm plate (12)! Do not open coffee-filling lid (2) during
brewing! Risk of burn injury.
• If not used for 2 hours, the buzzer sounds 5 times and coffee maker shuts off, the
LCD remains on.
CAUTION!
• After the brew cycle is complete, wait a minimum of 5 minutes before opening the
coffee-filling lid (2). Steam builds up under the coffee-filling lid (2). There is a risk of
injury from hot steam.
Extra features
• The drip stop valve (18) function allows you to remove carafe (14) during the brewing
cycle to serve a cup of coffee (replace carafe (14) within 30 seconds) (ill.
h
).
• Condensation control (5) allows water that has accumulated under the coffee-filling
lid (2), to flow into the filter area when the lid (2) is raised.
• Water filter holder (19) with charcoal filter (17).
• Cord storage (11) for easy storing of the power cord (13) (ill.
f
).
Button (keep warm function):
This coffee maker is provided with an adjustable keep warm plate (12) to control coffee
temperature after brewing.
• Press and hold (27) for 2 seconds. The digits to are flashing for 2 seconds.
Press (27) once more to change the heating temperature level from to .
• After 3 seconds the LCD display (31) goes back to time view (default view) and the
new setting is saved.
• Keep warm function can be adjusted at any time. Default setting is .
