General Electric 8861 Manual

A SERVICE OF

next previous







Up to 4 cordless handsets can be registered to the same base.

1. Press the  button.

. Press the 5 or 6 button to select REGISTRATION and press the  button.

3. Press the 5 or 6 button to select REGISTER and press the button, the

screen displays ENTER PIN (default setting = 0000).

4. Input the correct PIN code and press the

button to begin registration.

The screen displays SEARCHING. Press and hold the  button on the

base until the base screen displays REGISTRATION.

SEARCHING





WRONG PIN,

NO BASE



6. After successful registration, (the screen displays SUCCESSFUL).



To de-register a handset from the base.

1. Press the  button.

. Press the 5 or 6 button to select REGISTRATION and press the  button.

3. Press the 5 or 6 button to select REMOVE HANDSET and press the 

button, the screen displays ENTER PIN (default setting = 0000).



WRONG PIN

4. Input the correct PIN code and press the  button.

5. Press the 5 or 6 button to select the cordless handset (1,,3,4) to remove and

press the  button, the screen displays REMOVE HANDSET?.

6. Press the  button to conrm the setting.

7. Press the button to return to idle mode.

 NOT REG

