4
Cabinet Width 27” (68.6 cm)
Recommended
Cutout Location
from Floor 21 5/8” (54.9 cm)
Cutout Depth 23 1/2” (59.7 cm)
Cutout Width 25” (63.5 cm) Min.
25 1/4” (64.1 cm) Max.
Cutout Height 41 1/8” (104.5 cm) Min.
41 1/4” (104.8 cm) Max.
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. The
runners and braces must support
255 lbs (115 Kg).
Installation Instructions
Cutout for 27″ (68.6 cm) Built-In Oven
with Microwave models only
For JKP90 model only.
A
18"
27"
24"
2" x 4" or
Equivalent
Runners
24” (61 cm)
27”
(68.6 cm)
2” x 4” (5 cm x 10 cm)
or equivalent runners
level with bottom of
cutout
NOTE: If using equivalent
runners, then the center of the
equivalent runners should be
20 1/2” (52.1 cm).
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
5” Min.
(12.7 cm)
Junction Box
Location
5” (12.7 cm)
Max. from the
left or right
side
Allow minimum
1” (2.5 cm) for
overlap of oven
top and bottom
of cutout
Allow a minimum of 20”
(50.8 cm) for clearance
to adjacent corners,
drawers, walls, etc.
when door is open
Allow 1” (2.5 cm)
for overlap of oven
over side edges
of cutout
Cabinet
Width
27” (68.6 cm)
35” (88.9 cm)
Min. Above
base rail
20” (50.8 cm)
Cutout
Height
41 1/8”
(104.5 cm) Min.
41 1/4”
(104.8 cm) Max.
2” x 4”
(5 cm x
10 cm) or
equivalent
runners level
with bottom
of cutout
Recommended cutout
location from floor
21 5/8” (54.9 cm)
18”
(45.7 cm)
NOTE: If the cabinet does not
have a front frame and the sides
are less than 3/4” (1.9 cm) thick,
shim both sides equally to
establish the cutout width.
Alternate Junction Box
Location (access from
adjacent cabinet may
be required)
Cutout Width
25” (63.5 cm)
Min.
25 1/4” (64.1 cm)
Max.
