8
Light bulbs
7KHEXOEVDUHORFDWHGRQWKHXQGHUVLGHRI
the hood.
7RFKDQJHWKHOLJKWEXOEV
1. Remove the trim ring by turning it
counterclockwise.
2. Grasp the bulb on the edges and remove
by turning it counterclockwise.
3. Replace with the same type and size bulb.
These 120 volt, 50 watt, par 16 halogen flood
bulbs, with standard base, are available at
specialty lighting stores.
7KHVHEXOEVFDQDOVREHRUGHUHGIURP\RXU
*(VXSSOLHU
Order bulb no. :%;.
Care and Cleaning
Professional Range Hood
Warming
lamps
7KHZDUPLQJODPSVDUHORFDWHGRQWKH
underside of the hood.
These 120 volt, 175 watt, par 38 infrared heat
lamp bulbs, with standard base, are available
at some specialty lighting stores.
7KHVHLQIUDUHGEXOEVFDQDOVREHRUGHUHG
IURP\RXU*(VXSSOLHU
Order bulb no. :%;.
127( If warming lamps are not desired,
additional cooktop lighting can be obtained
by replacing the infrared bulbs with standard
incandescent bulbs with up to 100 watt
maximum ratings, with standard bases. These
bulbs are available at specialty lighting stores.
'RQRWXVHDVWHHOZRROSDGLWZLOOVFUDWFK
the surface.
To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always
wipe the surface in the direction of the grain. Follow
the cleaner instructions for cleaning
the stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call our toll-free
number:
National Parts Center 1.800.626.2002
*($SSOLDQFH3DUWVFRP
Stainless
steel
surfaces
(on some
models)
