Model H6248 Meat Grinder-10-
Reduce the risk of electrocution by
keeping all connections dry. DO NOT
touch plugs with wet hands. DO NOT
submerge in water. Failure to follow
these warning could result in seri-
ous injury.
Cleaning the motor housing:
1. UNPLUG THE MOTOR FROM THE
POWER SOURCE!
2. Wipe down the exterior surface of the
motor with a cloth soaked in a sanitiz-
ing solution. DO NOT submerge the
motor in water!
Lubrication:
The Model H6248 requires very little lubri-
cation. The following steps on the grinder
head parts will keep them moving freely
and keep them from oxidizing.
1. Be sure to use a non-vegetable
base, food service lubricant on this
machine.
2. Place a small drop of lubricant on the
front and rear flats on the shaft of the
feed screw.
3. Apply a thin film of lubricant to the cut-
ter dies to prevent them from rusting.
Unplug the meat grinder before
performing any cleaning or mainte-
nance.
